Coating Thickness Gauge PCE-CT 100 |ضخامت سنج پوشش
- تولیدکننده: PCE Instruments
- مدل کالا: PCE-CT 100
PCE-100 یک ضخامت سنج پوشش است که برای اندازه گیری سریع و آسان ضخامت سطوح فلزات آهنی و غیر آهنی به کار می رود. این ضخامت سنج دستی قابل حمل از القای مغناطیسی(ISO 2178) و جریان عادی(ISO 2360) برای اندازه گیری غیر مخرب استفاده می کند.
به همراه یک سنسور پراب جداگانه(که به طور جداگانه فروخته می شود) pce-ct 100 را می توان به عنوان یکی از مناسب ترین وسائل آزمایش و تست سطوح رنگ شده و پودری،هواپیما و ماشین به شمار آورد.
هشدار دهنده دستگاه را می توان برای مواقعی که به سطوح بسیار نازک یا بسیار ضخیم می رسد فعال کرد.
لوازم جانبی موجود به صورت جداگانه :
2-Ferrous-only angled probe pce-ct 100 f1.5r
3-Ferrous-only probe pce-ct 100 f10
4-Ferrous-only angled probe pce-ct 100 f3.5
5-High-precision combination probe pce-ct 100 fn0.2
6-Standard combination probe pce-ct 100 fn1.5 type s version
7-Angled combination probe for insid pipes pce-ct 100 fn1.5/90°
8-Angled combination probe pce-ct 100 fn1.5r
9-Angled combination probe pce-ct 100 fn3.5
10-non-ferrous-only probe pce-ct 100 n1.5
به همراه یک سنسور پراب جداگانه(که به طور جداگانه فروخته می شود) pce-ct 100 را می توان به عنوان یکی از مناسب ترین وسائل آزمایش و تست سطوح رنگ شده و پودری،هواپیما و ماشین به شمار آورد.
هشدار دهنده دستگاه را می توان برای مواقعی که به سطوح بسیار نازک یا بسیار ضخیم می رسد فعال کرد.
لوازم جانبی موجود به صورت جداگانه :
1-Ferrous-only probe pce-ct 100 f1.5
| Probe | PCE-CT 100 F1.5 |
| Measuring range | 0 ... 1500 μm / 1.5 mm / 59 mil |
| Application | Probe for measurements on ferrous metals like iron and steel |
| Measurement uncertainty (based on PCE standards) |
1 ± 3 μm or 3% of the measured value; whichever is greater 2 ± (1 μm + 2% of the measured value) 3 ± (1 μm + 1% of the measured value) |
| 1 Factory calibration | |
| 2 Zeroing | |
| 3 Foil calibration |
2-Ferrous-only angled probe pce-ct 100 f1.5r
| Probe | PCE-CT 100 F1.5R |
| Measuring range | 0 ... 1500 μm / 1.5 mm / 59 mil |
| Application | Angled probe for measurements on ferrous metals like iron and steel |
| Measurement uncertainty (based on PCE standards) |
1 ± 3 μm or 3% of the measured value; whichever is greater 2 ± (1 μm + 2% of the measured value) 3 ± (1 μm + 1% of the measured value) |
| 1 Factory calibration | |
| 2 Zeroing | |
| 3 Foil calibration |
3-Ferrous-only probe pce-ct 100 f10
| Probe | PCE-CT 100 F10 |
| Measuring range | 0 ... 10000 μm / 10 mm / 393 mil |
| Application | Angled probe for measurements on ferrous metals like iron and steel |
| Measurement uncertainty (based on PCE standards) |
1 ± 10 μm or 3% of the measured value; whichever is greater 2 ± (5 μm + 2% of the measured value) 3 ± (3 μm + 1% of the measured value) |
| 1 Factory calibration | |
| 2 Zeroing | |
| 3 Foil calibration |
4-Ferrous-only angled probe pce-ct 100 f3.5
| Probe | PCE-CT 100 F3.5 |
| Measuring range | 0 ... 3500 μm / 3.5 mm / 137 mil |
| Application | Angled probe for measurements on ferrous metals like iron and steel |
| Measurement uncertainty (based on PCE standards) |
1 ± 5 μm or 3% of the measured value; whichever is greater 2 ± (2 μm + 2% of the measured value) 3 ± (2 μm + 1% of the measured value) |
| 1 Factory calibration | |
| 2 Zeroing | |
| 3 Foil calibration |
5-High-precision combination probe pce-ct 100 fn0.2
| Probe | PCE-CT 100 FN0.2 |
| Measuring range | 0 ... 200 μm / 0.2 mm / 7 mil |
| Application | High-precision combination probe for thin layers on ferrous (iron / steel) and non-ferrous metals |
| Measurement uncertainty (based on PCE standards) |
1 ± 2.5 μm or 2.5% of the measured value; whichever is greater 2 ± (0.7 μm + 1.5% of the measured value) 3 ± (0.7 μm + 1% of the measured value) |
| 1 Factory calibration | |
| 2 Zeroing | |
| 3 Foil calibration |
6-Standard combination probe pce-ct 100 fn1.5 type s version
| Probe | PCE-CT 100 FN1.5 |
| Measuring range | 0 ... 1500 μm / 1.5 mm / 59 mil |
| Application | Combination probe for measurements on ferrous (iron / steel) and non-ferrous metals |
| Measurement uncertainty (based on PCE standards) |
1 ± 3 μm or 3% of the measured value; whichever is greater 2 ± (1 μm + 2% of the measured value) 3 ± (1 μm + 1% of the measured value) |
| 1 Factory calibration | |
| 2 Zeroing | |
| 3 Foil calibration |
7-Angled combination probe for insid pipes pce-ct 100 fn1.5/90°
| Probe | PCE-CT 100 FN1.5/90° |
| Measuring range | 0 ... 1500 μm / 1.5 mm / 59 mil |
| Application | Angled combination probe for measurements on ferrous (iron / steel) and non-ferrous metals inside pipes |
| Measurement uncertainty (based on PCE standards) |
1 ± 3 μm or 3% of the measured value; whichever is greater 2 ± (1 μm + 2% of the measured value) 3 ± (1 μm + 1% of the measured value) |
| 1 Factory calibration | |
| 2 Zeroing | |
| 3 Foil calibration |
8-Angled combination probe pce-ct 100 fn1.5r
| Probe | PCE-CT 100 FN1.5R |
| Measuring range | 0 ... 1500 μm / 1.5 mm / 59 mil |
| Application | Angled combination probe for measurements on ferrous (iron / steel) and non-ferrous metals |
| Measurement uncertainty (based on PCE standards) |
1 na 2 ± (0.05 mm + 5% of the measured value) 3 ± (0.05 mm + 3% of the measured value) |
| 1 Factory calibration | |
| 2 Zeroing | |
| 3 Foil calibration |
9-Angled combination probe pce-ct 100 fn3.5
| Probe | PCE-CT 100 FN3.5 |
| Measuring range | Fe: 0 ... 3500 μm / 3.5 mm / 137 mil NFe: 0 ... 3000 μm / 3.0 mm / 118 mil |
| Application | Angled combination probe for measurements on ferrous (iron / steel) and non-ferrous metals |
| Measurement uncertainty (based on PCE standards) |
1 ± 5 μm or 3% of the measured value; whichever is greater 2 ± (2 μm + 2% of the measured value) 3 ± (2 μm + 1% of the measured value) |
| 1 Factory calibration | |
| 2 Zeroing | |
| 3 Foil calibration |
10-non-ferrous-only probe pce-ct 100 n1.5
| Probe | PCE-CT 100 N1.5 |
| Measuring range | 0 ... 1500 μm / 1.5 mm / 59 mil |
| Application | Probe for measurements on non-ferrous metals |
| Measurement uncertainty (based on PCE standards) |
1 ± 3 μm or 3% of the measured value; whichever is greater 2 ± (1 μm + 2% of the measured value) 3 ± (1 μm + 1% of the measured value) |
| 1 Factory calibration | |
| 2 Zeroing | |
| 3 Foil calibration |
برچسب ها: PCE-CT 100,
ضخامت سنج
