ترانسمیتر یوکوگاوا | Yokogawa Temperature Transmitter YTA610-JA1A2DN/C1/KU2

Model: YTA610 - Temperature Transmitter
Output signal: -J - 4 to 20 mA DC with DC digital communication HART 7 protocol
A: Always A
Sensor input: 1 - Single
Housing code: A - Aluminium
Electrical code: 2 - 1/2 NPT female
Integral indicator: D - Digital indicator with Local Operating Switch
Mounting bracket: N - None
Option Codes: 
C1:
Output signal low-side in transmitter failure
Output signal low-side: -5%, 3.2 mA DC or less
Sensor burnout is also set to 'Low': -2.5%, 3.6 mA DC

KU2: ATEX
4-20 mA:
[Intrinsically safe approval]
  Applicable Standard: EN 60079-0; 2012+A11:2013, EN 60079-11:2012
  Certificate No. FM16ATEX0019X
  II 1 G Ex ia IIC T5...T4 Ga
  Ambient Temperature: -40 to 70C for T4, -40 to 50C for T5
  Enclosure: IP66/IP67 in accordance with only IEC 60529
  Entity Parameters:
  Supply/Output circuit: Ui=30V, li=200mA, Pi=1.0W, Ci-22nF, Li=0mH
  Sensor circuit: Uo=6V, Io=90mA, Po=135mW, Co=10F, Lo=3.9mH
  Dielectric strength: 500 V a.c.r.m.s., 1 min
  [+, -, C, 1, 2, 3, 4, 5] to Earth terminal
  [+, -, C] to [1, 2, 3, 4, 5]
[Flameproof and Dust Ignition Proof Approval]
  Applicable Standard: EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-31:2014
  Certificate: KEMA 07ATEX0130
  II 2 G Ex db IIC T6/T5 Gb, II 2 D Ex IIIC T70C/T90C Db
  Ambient Temperature for Gas Atmospheres: -40 to 75C for T6, -40 to 80C for T5
  Ambient Temperature for Dust Atmospheres: -30 to 65C for T70C, -30 to 80C for T90C
  Enclosure: IP66/IP67
  Electrical Connection: 1/2 NPT female and M20 female